A new way to regulate the water of your spa!
Here comes Gecko’s new heat pump solution. Using Gecko's IN.TEMP has never been so easy, Simply connect it to a Y series control that supports it and you’re good to go. Automatic detection, smart power management and no additional power circuit required, the IN.TEMP powers directly from the spa control.
Air sourced heat pumps will allow you to save up to 75% energy consumption in comparison with electric elements. The icing on the cake: Gecko’s IN.TEMP also uses an eco-friendly refrigerant.
With IN.TEMP, you can choose one of its six modes of operation that suits you the best, depending on your climate. Smart modes including Eco Heat, Smart Heat, Eco Auto, Smart Auto, Cool and Electric, let you take full advantage of your IN.TEMP to optimize your savings.
Price £2199 inc fitting, price quoted is for 50-mile radius of NG6 40p per mile thereafter (this may vary dependant on current fuel prices)
Product Overview
IN.TEMP only works with Gecko’s IN.YE and IN.YT control systems equipped with a RS-485 interface and IN.TOUCH 2 remote control app.
Compatible with a wide selection of topsides such as IN.K330, IN.K500, IN.K800 & IN.K1000 which auto-detect by the system upon connection.
Please contact us to confirm compatibility with your control system before ordering.
Spread the cost of your air source heat pump
We've partnered with Snap! to help offer finance to those who can't afford an air source heat pump outright. All you need to do is choose the heat pump you want, make a note of the price, then apply for finance to see if you'll be accepted through the Snap link!
Representative 19.9% APR
Product Specification:
Input supply: 220V ~ 240V, 50Hz
Power input (max): 5kw: 1.29kw / 7.5kw: 1.91kw
Rated current: 5kw: 3.9A / 7.5KW: 5.49a
Max current: 5kw: 6.07A / 7.5kw: 8.67A
Communication supply: 10-12 VDC, 80mA
Operating temperature: -5 °C (23 °F) to 43 °C (109 °F)
Water resistance: IPX4
Compressor: Rotary (GMCC)
Pressure: Min: 1,5 MPa (218 psi) Max: 4,15 MPa (609 psi)
Refrigerant: 5kw: R32/650g (22,9oz) / 7.5kw: R32/800g (28,2oz)
Best efficiency flow rate: 5kw: 2,27 M³/h (10 GPM)* / 7.5kw: 3,41 M³/h (15 GPM)*
Flow detector: Flow switch
Noise at 1 m: 5kw: 51,5dB(A) 62dB(A) / 7.5kw: 56,5dB(A)
| Input supply | 220V ~ 240V, 50Hz |
|---|---|
| Power input (max) | 5kw: 1.29kw / 7.5kw: 1.91kw |
| Rated current | 3.9A / 7.5KW: 5.49a |
| Max current | 6.07A / 7.5kw: 8.67A |
| Communication supply | 10-12 VDC, 80mA |
| Operating temperature | -5 °C (23 °F) to 43 °C (109 °F) |
| Water resistance | IPX4 |
| Compressor | Rotary (GMCC) |
| Pressure | 1,5 MPa (218 psi) Max: 4,15 MPa (609 psi) |
| Refrigerant | 5kw: R32/650g (22,9oz) / 7.5kw: R32/800g (28,2oz) |
| Best efficiency flow rate | 5kw: 2,27 M³/h (10 GPM)* / 7.5kw: 3,41 M³/h (15 GPM)* |
| Flow detector | Flow switch |
| Noise at 1 m | 5kw: 51,5dB(A) 62dB(A) / 7.5kw: 56,5dB(A) |
| Corner Top Left | no_selection |
Spread the cost of your air source heat pump
We've partnered with Snap! to help offer finance to those who can't afford an air source heat pump outright. All you need to do is choose the heat pump you want, make a note of the price, then apply for finance to see if you'll be accepted through the Snap link!
Representative 19.9% APR
Looking to part-exchange your old spa for one of our shiny new hot tubs?
We accept pretty much any hot tub in part exchange, regardless of condition.
If your hot tub is completely non-functioning, we may not make a cash offer for it but will dispose of it for free when you purchase a new hot tub.
Fill in the form below with as much detail as you can, and we'll come back to you ASAP with a valuation.
