HydroPro Air Source Heat Pump For Hot Tubs

We all know in the current climate the price of running a hot tub has doubled like most of our everyday appliances. Over the past 6 months we have being working hard on methods to decrease running cost and we have adapted the air source heat pump to be compatible with 95% of spas no matter what make it is.

These hot tub air source heat pumps are compatible with either a 13A Plug & Play or a 32A spa and can save on average 50% on your electric bill and up to 75% in summer. All we need from you is a short video showing where your hot tub is located and also the make and the model. When we have this information we can the advise if the air source pump can be fitted to your hot tub.

Price: £1799 inc fitting, price quoted is for 5 mile radius of NG6.

40p per mile there after (this may vary dependant on current fuel prices)

Product Description

Hydro-Pro Heat Pumps, type P On/Off - High Coefficient Of Performance with Titanium Heat Exchanger, Precision Temperature Control, Low Noise Compressor and Fan in a compact unit.

Hydro-Pro heat pumps help to extend the swimming season, capable of heating and cooling both in-ground and above ground pools during the extended summer season.  This makes the pool heater suitable for swimmers who use their pool on a seasonal basis from May to October.  Extremely efficient, economical and an environmentally friendly way of heating your pool.  A good solar cover must be used in conjunction with these heat pumps.  Hydro-Pro heat pumps must be installed outside but will work with temperatures as low as -5°C but efficiency will obviously be affected.

Features:

• "All seasons" model that works down to -5°C
• Quiet running
• Titanium Heat Exchanger resistant to erosion from Chlorine, Bromine and Salt in the water
• For heating and cooling during the extended summer season
• Integrated Microprocessor monitors all sensors and controls the unit without needing user intervention 
• Easy temperature control with LCD display
• Automatic defrost
• Easy installation
• High efficiency, COP up to 6.4
• Cabinet made of ABS for longer lifespan
• R32 gas, which has a 3x lower GWP (Global Warming Potential) than R410A gas and improved efficiency 
• Low water flow rate of 2.3 cubic metres per hour required to operate correctly
• 2 year parts warranty for heat pump and compressor

Spread the cost of your air source heat pump

We've partnered with Snap! to help offer finance to those who can't afford an air source heat pump outright. All you need to do is choose the heat pump you want, make a note of the price, then apply for finance to see if you'll be accepted through the Snap link!

Representative 19.9% APR

Learn more about Snap

Technical Specifications: